Vanguard TTRA-S2 (ATRT-03 S2, ATRT-03A S2, ATRT-03B S2, Tri-Phase) - Manual (Page 12)

TTRA-S2 VERSION 1.x SOFTWARE MANUAL REV 2
9
d. Test Record Path
The default location where test records are stored on the PC hard drive is listed in
the “Test Record Path” section. You can change the default storage location by
clicking on the “Browse” button and then selecting a different folder.
3. Click on the “OK” button to apply all changes to the program settings.
3.3 Printer Setup
To setup the printer:
1. Click on the File menu and select Print Setup… The following window will be displayed:
2. Select the printer you would like to use from the “Name” drop-down list.
3. Select the appropriate options for the printer.
4. Click on the “OK” button.