Vanguard TTRA-S2 (ATRT-03 S2, ATRT-03A S2, ATRT-03B S2, Tri-Phase) - Manual (Page 28)

TTRA-S2 VERSION 1.x SOFTWARE MANUAL REV 2
25
5.2 Recalling a Test Plan From the PC Hard Drive
Test plans stored on the PC hard drive can be recalled using the steps below:
1. From the File menu or the Test-Plan menu, click on Recall Test Plan... The following
window will be displayed:
• The top left section of the window displays the name of the directory where the test
plans are being retrieved from. If you wish to retrieve test plans from a different
directory, click on the “Path” button and browse to the folder containing the test
plans.
• If you would like to print the current directory listing, click on the “Print Directory”
button at the bottom of the window. Select the printer to print to and click on the
“OK” button.
2. Click on the filename you would like to retrieve and click the “OK” button. The test plan
will be loaded and the test plan parameters will be displayed. You may change any of
the test plan parameters as needed.