Vanguard TTRA-S2 (ATRT-03 S2, ATRT-03A S2, ATRT-03B S2, Tri-Phase) - Manual (Page 36)

TTRA-S2 VERSION 1.x SOFTWARE MANUAL REV 2
33
5.8 Exporting a Test Plan to a Text File
You can export a test plan to a text file by using the steps below:
1. From the File-Util menu, click on Export and then select Test Plan to Text File
(alternatively you can click on the File menu, click on File Utilities, click on Export, and
then select Test Plan to Text File). The following window will be displayed:
2. If the test plan you would like to export is not in the current directory, click on the
“Path” button at the top of the window and browse to the directory containing the file.
Once you have located the test plan to be exported, click on the filename. You may
select additional test plans by holding down the [CTRL] key and clicking on each
subsequent filename. Once you have selected the test plan(s) to be exported, click on
the “OK” button. The following window will be displayed:
3. Browse to the folder where you would like the text file(s) to be saved and click on the
“OK” button.