Vanguard VCBA ver.10.xx - Manual (Page 20)

REV 2 VCBA VERSION 10.xx SOFTWARE MANUAL
18
4.5 Copying a Test Record
To copy a test record from one location on the PC hard drive to another location:
1. From the File menu, click on File Utilities and then select Copy Test Record… The
following window will be displayed:
2. If the test record you would like to copy is not in the current directory, click on the
“Path” button at the top of the window and browse to the directory containing the file.
Once you have located the test record to be copied, click on the file name. You may
select additional test records by holding down the [CTRL] key and clicking on each
subsequent file name. Once you have selected the test record(s) to be copied, click on
the “OK” button. The following window will be displayed:
3. Browse to the folder where you would like the test record to be copied to, and then
click on the “OK” button. The test record will be copied to this folder with the same file
name as the original.