Vanguard VCBA ver.10.xx - Manual (Page 46)

REV 2 VCBA VERSION 10.xx SOFTWARE MANUAL
44
4. Click on the “Contact:” dropdown list to select the contact you would like to override
the values for. For the example above, we would like to override the Close value for
contact 2, so we will select 2 from the dropdown list. The values for contact 2 will be
displayed as shown:
5. Click on the “Enable” checkbox next to each field that you would like to override with
the value from the cursor position. The value from the cursor position will appear in the
input area to the right of the calculated value. In this case, we would like to override the
Close value, so we will click on the “Enable” checkbox to the right of the input area.
Once enabled, the value from the cursor position will be inserted in the input area as
shown: