Vanguard VCBA ver.10.xx - Manual (Page 48)

REV 2 VCBA VERSION 10.xx SOFTWARE MANUAL
46
4.11.8. Printing the Graphic Test Results
To print the graphic test results:
1. While viewing the tabulated or graphics test results of a test record, click on the Print
menu and select Print Graphic.
2. Select the printer you would like to print to and click on the “OK” button. All graphic test
results pages will be printed. A typical graphic results printout is shown in Figure 5
below.
Figure 5 Typical Graphic Results Printout
NOTES
• The printout will have the same expansion scale as the scale displayed
on the screen, so if you were viewing an expansion, the expansion
graph will be printed.
• If you had checked the “Plot Velocity Curve” checkbox in the System
Settings dialog box, the printout will include the Velocity Curve. Please
see section 4.11.1 for further information on how to change this
setting.
• Any customizations made to the graphic display (see sections 4.11.1,
4.11.2, and 4.11.3) will also apply to the printout. However, the
background color of the printout will always be white.