Vanguard VCBA ver.10.xx - Manual (Page 67)

VCBA VERSION 10.xx SOFTWARE MANUAL REV 2
65
5.5 Saving a Test Plan
To save an open test plan:
1. Click on the Setup menu and select Save Test Plan…
2. The test plan will be saved with the current file name.
5.6 Saving a Test Plan from a Test Record
If you are viewing the tabulated test results of a test record, you can press the [Page Down] key
to view the test plan portion of the test record. You can save the test plan by itself as a test plan
file for future use. To save the test plan from a test record:
1. Retrieve the test record from the CB analyzer or from the PC hard drive per the
instructions in section 4.2 or 4.3, respectively.
2. Click on the Setup menu and select Save Test Plan… The following window will be
displayed:
3. Enter the file name for the test plan and click on the “OK” button. The test plan will be
saved to the hard drive in the default test plan directory.
NOTE
You can change the default test plan directory. Please see section 3.4 for
further information.