Vanguard VCBA ver.10.xx - Manual (Page 23)

VCBA VERSION 10.xx SOFTWARE MANUAL REV 2
21
4.8 Merging Test Records
You can merge two test records to create a single test record. For example, you can combine
two 6-channel timing shots to create a 12-channel timing shot. To merge two test records:
1. From the File menu, click on File Utilities and then select Merge Test Record… The
following window will be displayed:
2. You can click on the “Path” button to browse to the directory containing the test
records to be merged. Once you have located the test records, click on the first file
name to be merged and then hold down the [CTRL] key and click on the second file
name. Then click on the “OK” button.
NOTE
Both test records must be of the same type. For example, you cannot merge
a CLOSE type test record with an OPEN type test record.
The following dialog box will be displayed:
3. Enter the file name for the new merged test record and then click on the “OK” button.
The data from the two source test records will be merged and saved as the new file
name. The two source test records will not be modified in any way.