Vanguard VCBA ver.10.xx - Manual (Page 28)

REV 2 VCBA VERSION 10.xx SOFTWARE MANUAL
26
NOTES
• When a test record is saved, the test plan is saved along with it. You may also
save the test plan as a separate test plan file. Please see section 5.6 for
further information.
• The Contact Analysis values can also be changed from the menu system.
From the File menu, click on Setup and then click on Contact Analysis. Then
select the option you would like to edit. If the contact analysis parameters
are changed, the Pass/Fail results will be updated based on the new
parameters.
• The Travel Analysis values can also be changed from the menu system. From
the File menu, click on Setup and then click on Travel Analysis. Then select
the option you would like to edit. If the travel analysis values are changed,
the Pass/Fail results will be updated based on the new parameters.
• If the Open and Close analysis points are changed, the VCBA software will re-
calculate the circuit breaker velocity and update the Pass/Fail results.