Vanguard CT-6500 S2 - Manual (Page 46)

CT-6500 Series 2 Operating Instructions
45
9.7 Deleting a Timing Test Record
Users can delete a specific timing test record or all of the timing test records from the CT-
6500’s EEPROM by using the steps in Table 12.0.
Table 12.0 Deleting a Timing Record
STEP OPERATION ACTION DISPLAY
1 SELECT SET UP MENU. PRESS # 3 KEY. 1.ANALYSIS POINTS
2.MEASUREMENT UNITS
3.SAVE / RESTORE
4.NEXT PAGE
2 SELECT SAVE / RESTORE MENU. PRESS # 3 KEY. 1.SAVE SHOT
2.RESTORE SHOT
3.SHOT DIRECTORY
4.ERASE SHOT
3 SELECT ERASE SHOT. PRESS # 4 KEY. 1.ERASE SHOT
2.ERASE ALL SHOTS!
4 SELECT ERASE SHOT. PRESS # 1 KEY. ENTER SHOT NUMBER
TO BE ERASED
XXXX
"ENTER" TO CONFIRM
5 ENTER SHOT NUMBER “1” TO BE
ERASED.
PRESS KEYS 0-9 TO
SELECT SHOT
NUMBER, PRESS
THE "ENTER" KEY
TO CONFIRM.
ERASE SHOT # 0001
TEST: OPEN
DATE: 03\12\07 09:12
"ENTER" TO CONFIRM
6 CONFIRM TO ERASE SHOT. PRESS THE
"ENTER" KEY.
ERASE IN PROCESS
PLEASE WAIT
7 WAIT FOR SHOT BEING ERASED. NO ACTION. ERASE COMPLETE
8 RETURN TO MAIN MENU. PRESS ANY KEY. 1.RUN TEST 06/10/07
2.GET RESULTS 20:10:01
3.SETUP
4.DIAGNOSTIC