ZOLL E Series Monitor Defibrillator Rev B - Manual (Page 9)

12-Lead Reports
9650-1218-01 Rev. B 7
through all of its unidentified records to find the
patient's information.
Patient Age
To set the patient age, press the Age softkey, to display
the keypad. Use the scroll keys to select a number, then
press the Commit ( ) key to enter the digit in the Age
field (both scroll keys and the Commit key are on top of
the unit). Repeat for each digit (up to 3 digits). Press the
Return softkey to save the highlighted age and return to
the Patient Information screen.
If you want to return to the Patient Information screen
without saving the age, press the Cancel softkey.
Patient Gender
Press the Gender softkey to toggle the highlight
between both genders displayed above the Gender
softkey. Press the Enter softkey to save the highlighted
gender and return to the Patient Information screen.
If you want to return to the Patient Information screen
without saving the highlighted gender, press the Return
softkey.
Patient Records
Press the Patient Records softkey to access the Patient
Records screen. Use this screen to transmit or print
specific 12-lead ECG records denoted by patient
identification number (ID #), date, and time.
Approximately 20 patient records can be stored on the
E Series. You can erase 12 lead patient record memory
by pressing and holding the summary button for 4
seconds and then pressing the Erase 12 Lead softkey.
24
NIBP
-
---
---
SpO2%
---
CO2 --- m
m Hg --- RR
ECG 96 II x1.5
kPa
Retur n
2 3
4 6
7 8 9
0
Age:
61
5
w
‹‹‹ ‹‹‹
1
w
Cancel
‹‹‹ ‹‹‹
Enter Gender Retur n
Female
Male
Use the scroll keys on top of the unit to navigate through
the list of stored 12-lead records.
Press the appropriate softkey depending on what you
want to do:
• Print All — When this softkey is selected, the unit
prints all stored 12-lead patient records on the strip
chart.
• Print Record — When this softkey is selected, the
unit prints the selected 12-lead patient record on the
strip chart.
• Transmit — When this softkey is selected, the unit
allows you to transmit the selected 12-lead patient
record. Use the scroll keys at the top of the unit to
select a recipient from the list, then chose Xmit Now,
Manual Dial, or Cancel Xmit.
• Return — When this softkey is selected, the unit
exits the Patient Records screen and displays the
12-lead menu.
12-Lead Reports
Immediately after acquisition, the 12-lead data prints in
the following order:
1. 12-Lead ECG waveforms
2. Patient information
3. ECG analysis using the GE Medical Systems
Information Technologies 12SL Analysis Program (if
configured)
4. Measurements matrix (if configured)
See the figures in the next section, “12-Lead ECG
Waveforms,” for a view of numbers 1, 2, and 4 above.
Optionally, you can configure the unit to print median
complexes in a 4x3 format or standard data in a 2x6
format (direct FAX only). Refer to the E Series
Configuration Guide for more details.
14:07:32
Print
Record Print
All
17 JUN 04
17 JUN 04
17 JUN 04
200406171407 14:07:32
11:52:48 200406171152
17 JUN 04
200406171324 13:24:03