ZOLL M Series CCT Defibrillator Rev A - Manual (Page 19)

Configuration Settings
15
Fax/Communication Phone Numbers
Allows the user to pre-configure up to 24 locations and phone numbers and delete obsolete
phone numbers. The M Series CCT uses the phone numbers to transmit data to a fax machine or
Catalyst MUSE system following 12-lead analysis.
If you are transmitting to a Catalyst MUSE system, you can configure multiple phone numbers
to access the same system. This will enable you to quickly try alternate numbers if you
encounter difficulty transmitting to the Catalyst MUSE system. The system administrator
provides these numbers when you initially set up access to the system. See Appendix B of the
12- Lead ECG Monitoring Operator’s Guide insert (part number 9650-0215-01) for more
information.
You must also configure the Catalyst MUSE site and location identifiers before you can
transmit to a Catalyst MUSE system. See “MUSE Site and Location” on page 21.
It is also recommended that you set up the M Series device identifier; see “Device Identifier” on
page 10.
Updating Fax/Communication Information
To transmit data to a fax machine or a Catalyst MUSE system, you must configure the
following:
• The location of the medical facility to which data will be transmitted
• The phone number to which data will be transmitted
• The type of data to be transmitted (“Fax” if transmitting to a fax machine; “Data” if
transmitting to Catalyst MUSE)
To update fax/MUSE communications phone numbers:
1. From the main System Configuration menu, press the Next Item softkey until “FAX/
COMMUNICATION PHONE NUMBERS” highlights.
2. Press Change Value softkey. The Phone Numbers menu displays:
3. Press Next or Prev softkey until either:
• The phone number to be changed highlights
• An empty line highlights (if adding a new phone number)
6\VWHP&RQILJXUDWLRQ
1H[W

'HOHWH 3UHY

'HWDLOV


5HWXUQ
0HWUR+RVSLWDO 
BBBBBBBBBBBBBBBBB
BBBBBBBBBBBBBBBBB
BBBBBBBBBBBBBBBBB
BBBBBBBBBBBBBBBBB
BBBBBBBBBBBBBBBBB
BBBBBBBBBBBBBBBBB
BBBBBBBBBBBBBBBBB
3+21(180%(56