Extron Electronics VSC 500_700_700D User Guide - Manual (Page 18)

Auto-Imaging Menu (Auto Set)
The following flowchart illustrates the Auto-Image™ feature. Pressing the Next button will
display the submenu and automatically size and center the displayed image to fill the output
screen.
Power
on
Extron
VSC 500
Auto Set
NEXT=Go
Auto Set
...
2 sec.
2 sec.
31.46KHz
59.94 Hz
MENU
NEXT
2 sec.
Auto imaging
• automatically sizes
and centers the input
to fill the screen
Figure 13. Auto Imaging Menu
NOTES: • If you press the Menu button while a submenu is active, the next main menu
becomes active. For example, the menu changes from the Auto Set submenu
to the Output Configuration main menu.
• To return to the default menu cycle, let the VSC time out for 10 seconds, or
press the Menu button until the Exit Menu menu appears, then press the Next
button.
VSC 500/700/700D User Guide • Installation and Operation 12