Figure 5-8: lpt cable connection, Figure 5-9: connect the lpt device – IEI Integration NANO-LX v1.10 User Manual
Page 105
Advertising
NANO-LX EPIC SBC
the 26-pin box-header connector on the PCIE-9452, connect the cable
connector to the onboard connector. See Figure 5-8.
Figure 5-8: LPT Cable Connection
Step 4:
Attach the LPT connector to the chassis. To secure the LPT interface
connector to the chassis please refer to the installation instructions that came
with the chassis.
Step 5:
Connect LPT device. Once the LPT interface connector is connected to the
chassis, the LPT device can be connected to the LPT interface connector. See
Step 0:\
Figure 5-9: Connect the LPT Device
Page 105
Advertising