IEI Integration NANO-LX v1.10 - Manual (Page 152)

NANO-LX EPIC SBC
Reserved Memory Base [N/A]
The Reserved Memory Base option specifies the base address for the peripheral device.
The Reserved Memory Base options are:
N/A (Default)
C800
CC00
D000
D400
D800
DC00
x Reserved Memory Length [8K]
The Reserved Memory Length option can only be accessed if the Reserved Memory
Base option is not set to N/A. The Reserved Memory Length specifies the amount of
memory reserved for the peripheral device. The Reserved Memory Length options:
8K (Default)
16K
32K
64K
PCI/VGA Palette Snoop [Disabled]
The PCI/VGA Palette Snoop option enables the system to determine whether or not
some special VGA cards, high-end hardware MPEG decoders and other similar devices
are allowed to look at the VGA palette on the video card so these devices can determine
what colors are in use. This option is needed very rarely and should be left "Disabled"
unless a video device specifically requires the setting to be enabled upon installation.
Disabled (Default) Does not allow the graphics devices to examine the VGA
palette on the graphics card.
Page 152