IEI Integration NANO-LX v1.10 - Manual (Page 129)

NANO-LX EPIC SBC
Off The keys on the keypad are not activated.
On (Default) Activates the keys on the keypad.
Gate A20 Option [Fast]
Use the Gate A20 Option to set if the keyboard controller or the chipset controls the Gate
A20 switching.
Normal The keyboard controller does the switching.
Fast (Default) The chipset does the switching.
Typematic Rate Setting [Disabled]
Use the Typematic Rate Setting configuration option to specify if only one character is
allowed to appear on the screen if a key is continuously held down. When this option is
enabled, the BIOS reports as before, but it then waits a moment, and, if the key is still held
down, it begins to report that the key has been pressed repeatedly. This feature
accelerates cursor movement with the arrow keys.
Disabled (Default) Disables the typematic rate.
Enabled Enables the typematic rate.
Typematic Rate (Chars/sec) [6]
The Typematic Rate option can only be configured if the Typematic Rate Setting is
enabled. Use the Typematic Rate option to specify the rate keys are accelerated.
6 (Default) 6 characters per second
8 8 characters per second
10 10 characters per second
12 12 characters per second
15 15 characters per second
Page 129