IEI Integration NANO-LX v1.10 - Manual (Page 107)

NANO-LX EPIC SBC
SATA cable and insert the cable connector into the onboard SATA drive
connector. See Figure 5-11.
Figure 5-11: SATA Drive Cable Connection
Step 5: Connect the cable to the SATA disk. Connect the connector on the other end
of the cable to the connector at the back of the SATA drive. See Figure 5-12.
Step 6: Connect the SATA power cable. Connect the SATA power connector to the
back of the SATA drive. See Figure 5-12. Step 0:
Page 107