IEI Integration NANO-LX v1.10 - Manual (Page 39)

NANO-LX EPIC SBC
2.6.3 PCI to ISA Bridge
An ITE IT8888G PCI to ISA bridge single function device connects the onboard NANO-LX
ISA bus PC/104 connector to the GeodeLink™ PCI bridge. The IT8888G has a PCI
specification v2.1 compliant 32-bit PCI bus interface and supports both PCI Bus master
and slave. The PCI interface supports both programmable positive and full subtractive
decoding schemes. Some of the features of the IT8888G PCI to ISA bridge are listed
below.
PCI Interface
Programmable PCI Address Decoders
PC/PCI DMA Controller
Distributed DMA Controller
ISA Interface
SM Bus
1 analog line-level mono output: MONO_OUT
Power-on Serial Bus Configuration
Serial IRQ
Versatile power-on strapping options
Supports NOGO function
Single 33 MHz Clock Input
+3.3V PCI I/F with +5V tolerant I/O buffers
+5V ISA I/F and core Power Supply
2.7 Environmental and Power Specifications
2.7.1 System Monitoring
The NANO-LX is capable of self-monitoring various aspects of its operating status
including:
CPU, chipset, and battery voltage, +3.3V, +5V, and +12V
RPM of cooling fans
CPU and board temperatures (by the corresponding embedded sensors)
Page 39