IEI Integration NANO-LX v1.10 - Manual (Page 227)

NANO-LX EPIC SBC
WARNING!
The new power adapter cable for the NANO-LX has its “Ground” pin
removed from the 3-pin ATX feature connector. Connecting the power
feature connector cable will destroy the CPU board.
Step 3: Be sure that the standard 4-pin AT power connector is connected to the SBC
power connector (CN2).
Step 4: Connect the optional ATX power cable to the AT power cable using their 4P
power connectors (Figure F-2).
Step 5: Connect the optional ATX power cable to the SBC ATX connector (CN3) using
the 3-pin ATX feature connector (Figure F-2).
Step 6: Connect an ATX power button switch to CN5.
Step 7: Connect the 20-pin ATX power connector to an ATX power supply (Figure F-2).
Figure F-2: ATX Power Adapter Cable
Step 8: Press the power button switch once to turn on the system. To turn off the power
supply press the ATX power switch button for about 4 seconds. Step 0:
Page 227