IEI Integration NANO-LX v1.10 - Manual (Page 144)

NANO-LX EPIC SBC
The ECP Mode Use DMA option is only available if the Parallel Port Mode option is set
to ECP mode. Use the ECP Mode Use DMA option to specify the DMA channel the
parallel port must use in the ECP mode.
1 The parallel port uses DMA Channel 1 in ECP mode.
3 (Default) The parallel port uses DMA Channel 3 in ECP mode.
CIR Port Address [Disabled]
Use the CIR Port Address option to enable the CIR port and set the CIR port base
address.
Disabled (Default)
3F8
2F8
3E8
2E8
x CIR Port IRQ [11]
The CIR Port IRQ option is only available if the CIR Port Address option is not disabled.
Use the CIR Port IRQ option to specify an interrupt address for the CIR port. The CIR
Port IRQ options are:
11 (Default)
5
Onboard Serial Port # [XXX]
Use the Onboard Serial Port # option to select the I/O address and IRQ for any additional
onboard serial ports. The Onboard Serial Port # address options are:
Disabled
3F8
2F8
3E8
2E8
Page 144