Figure b-14: select a local source drive – IEI Integration WAFER-945GSE2 v2.00 User Manual
Page 149
Advertising
WAFER-945GSE2 3.5" Motherboard
Page 134
Figure B-14: Select a Local Source Drive
Step 6:
Select a source partition (Part 1) from basic drive as shown in
Figure B-15: Select a Source Partition from Basic Drive
Step 7:
Select 1.2: [Recovery] NTFS drive and enter a file name called
iei
(
78
Figure B-16). Click Save. The factory default image will then be saved in the
selected recovery drive and named IEI.GHO.
WARNING:
The file name of the factory default image must be
iei.GHO
.
Advertising