IEI Integration WAFER-945GSE2 v2.00 - Manual (Page 51)

WAFER-945GSE2 3.5" Motherboard
Page 36
3.3.1 Ethernet Connectors
CN Label: LAN1 and LAN2
CN Type: RJ-45 connector
CN Location: See Figure 3-22
CN Pinouts: See Table 3-23
The WAFER-945GSE2 is equipped with two built-in RJ-45 Ethernet controllers. The
controllers can connect to the LAN through two RJ-45 LAN connectors. There are two
LEDs on the connector indicating the status of LAN. The pin assignments are listed in the
following table:
Pin Description Pin Description
1 MDIA3- 2 MDIA3+
3 MDIA2- 4 MDIA1-
5 MDIA1+ 6 MDIA2+
7 MDIA0- 8 MDIA0+
Table 3-23: LAN Pinouts
Figure 3-23: RJ-45 Ethernet Connector
The RJ-45 Ethernet connector has two status LEDs, one green and one yellow. The green
LED indicates activity on the port and the yellow LED indicates the port is linked. See
Table 3-24.
Status Description Status Description
Green Activity Yellow Linked
Table 3-24: RJ-45 Ethernet Connector LEDs