IEI Integration WAFER-945GSE2 v2.00 User Manual
Page 92
WAFER-945GSE2 3.5" Motherboard
Page 77
option and enter a decimal number between 000 and 127. The temperature range is
specified below.
Minimum Value: 0°C
Maximum Value: 127°C
CPU Fan Start PWM [070]
The CPU Fan Start PWM option can only be set if the CPU FAN Mode Setting option is
set to Automatic mode. Use the CPU Fan Start PWM option to select the PWM mode
the fan starts to rotate with after the temperature specified in the CPU Temperature Limit
of On is exceeded. The Super I/O chipset supports 128 PWM modes. To select a value,
select the CPU Fan Start PWM option and enter a decimal number between 000 and 127.
The temperature range is specified below.
PWM Minimum Mode: 0
PWM Maximum Mode: 127
Slope PWM [0.5 PWM]
The Slope PWM option can only be set if the CPU FAN Mode Setting option is set to
Automatic mode. Use the Slope PWM option to select the linear rate at which the PWM
mode increases with respect to an increase in temperature. A list of available options is
shown below:
0.125
PWM
0.25
PWM
0.5
PWM
1
PWM
2
PWM
4
PWM
8
PWM
15
PWM
The following system parameters and values are shown. The system parameters that are
monitored are:
System Temperatures: The following system temperatures are monitored