IEI Integration WAFER-945GSE2 v2.00 - Manual (Page 19)

WAFER-945GSE2 3.5" Motherboard
Page 4
The WAFER-945GSE2 has the following connectors on-board:
1 x ATX power connector
1 x ATX enable connector
1 x Audio connector
1 x Backlight inverter connector
1 x Battery connector
1 x CompactFlash® socket
1 x Digital input/output (DIO) connector
1 x Fan connector
1 x Keyboard and mouse connector
1 x LED connector
1 x LVDS connector
1 x PC/104 ISA connector
1 x Power button connector
1 x Reset button connector
1 x RS-232/422/485 serial port connector
2 x Serial ATA (SATA) connectors
1 x SPI flash connector
2 x USB 2.0 connectors (supports four USB 2.0 devices)
The WAFER-945GSE2 has the following external peripheral interface connectors on the
board rear panel.
2 x Ethernet connectors
1 x RS-232 serial port connector
2 x USB connectors
1 x VGA connector
The WAFER-945GSE2 has the following on-board jumpers:
AT/ATX power mode setting
CF card setting
Clear CMOS setup
COM2 port mode setting
LVDS1 voltage selection