IEI Integration WAFER-945GSE2 v2.00 - Manual (Page 91)

WAFER-945GSE2 3.5" Motherboard
Page 76
When the CPU FAN Mode Setting option is in the PWM Manually mode, the following
parameters can be set.
CPU Fan PWM Control
CPU Temperature Limit of Off [000]
WARNING:
Setting this value too high may cause the fan to stop when the CPU is
at a high temperature and therefore cause the system to be damaged.
The CPU Temperature Limit of Off option can only be set if the CPU FAN Mode Setting
option is set to Automatic mode. Use the CPU Temperature Limit of Off option to select
the CPU temperature at which the cooling fan should automatically turn off. To select a
value, select the CPU Temperature Limit of Off option and enter a decimal number
between 000 and 127. The temperature range is specified below.
Minimum Value: 0°C
Maximum Value: 127°C
CPU Temperature Limit of On [020]
WARNING:
Setting this value too high may cause the fan to start only when the
CPU is at a high temperature and therefore cause the system to be
damaged.
The CPU Temperature Limit of On option can only be set if the CPU FAN Mode Setting
option is set to Automatic mode. Use the CPU Temperature Limit of On option to select
the CPU temperature at which the cooling fan should automatically turn on. When the fan
starts, it rotates using the starting pulse width modulation (PWM) specified in the CPU Fan
Start PWM option below. To select a value, select the CPU Temperature Limit of On