Figure 4-7: sata drive cable connection, S into place. see figure 4-7 – IEI Integration WAFER-945GSE2 v2.00 User Manual
Page 65
Advertising
WAFER-945GSE2 3.5" Motherboard
Page 50
Figure 4-7: SATA Drive Cable Connection
Step 3:
Connect the cable to the SATA disk. Connect the connector on the other end
of the cable to the connector at the back of the SATA drive. See Figure 4-8.
Step 4:
Connect the SATA power cable (optional). Connect the SATA power
connector to the back of the SATA drive. See Figure 4-8.
Advertising