Agilent Technologies USB/GPIB Interface Converter 82357A - Manual (Page 14)

14 Chapter 1
Installing the 82357A
Step 3: Connecting the 82357A
Connecting the 82357A to Your PC
This section shows steps to connect the 82357A to a USB port on your PC
or to connect to your PC via a USB Hub.
1 Connect to a USB Port. Make sure the PC is ON and plug the 82357A
USB cable into any available USB port on your PC. Do not connect
the 82357A to GPIB instruments at this time.
GPIB Connector.
Connect to up to 14
GPIB Instruments.
Green READY LED
Red FAIL LED
Green ACCESS LED
USB Cable. Connect
to USB Port.
READY LED
82357A
ACCESS LED
FAIL LED
Connect to USB Port
USB Cable