Agilent Technologies USB/GPIB Interface Converter 82357A - Manual (Page 27)

Chapter 1 27
Installing the 82357A
Step 5: Connecting GPIB Instruments
Step 5: Connecting GPIB Instruments
After the 82357A has been installed and configured, the next step is to
connect GPIB instruments to the 82357A. This step includes:
„ Connecting a Single GPIB instrument
„ Connecting Multiple GPIB Instruments
Connecting a Single GPIB Instrument
The following figure shows connection from a single GPIB instrument to
the GPIB port on an 82357A. When you have made the connection for
your system, go to “Step 6: Programming via the 82357A”. You may want
to record the primary GPIB address of the attached instrument for future
programming use.
CAUTION
To avoid damage to the connectors, only finger-tighten the connectors.
82357A
USB Cable
GPIB Instrument
82357A GPIB Connector
GPIB Instrument
To USB Port
on PC or on
USB Hub
GPIB Port