Agilent Technologies USB/GPIB Interface Converter 82357A - Manual (Page 6)

6 Chapter 1
Installing the 82357A
This Agilent 82357A USB/GPIB Interface Converter User’s Guide shows
how to install and configure the Agilent 82357A USB/GPIB Interface
Converter for PCs with Windows 98 (SE), Windows Me, Windows 2000,
or Windows XP Professional operating systems.
This chapter shows suggested steps to install the 82357A, including:
„ Steps to Install the 82357A
„ Step 1: Before You Install the 82357A
„ Step 2: Installing the Agilent IO Libraries Suite
„ Step 3: Connecting the 82357A
„ Step 4: Configuring the 82357A
„ Step 5: Connecting GPIB Instruments
„ Step 6: Programming via the 82357A
NOTE
The 82357A USB/GPIB Interface Converter is supported ONLY for PCs
with Windows 98 (Second Edition), Windows Me, Windows 2000, or
Windows XP Professional operating systems.
These operating systems are specifically not supported:
Windows 98 First (“Gold”) Edition
Windows 95
Windows NT 4.0 (OS does not support USB)
In case of difficulty in installing the 82357A, see Chapter 3 -
Troubleshooting the 82357A. See Chapter 4 - 82357A User Guide
Information for guide contents and general guide information.