Agilent Technologies USB/GPIB Interface Converter 82357A - Manual (Page 9)

Chapter 1 9
Installing the 82357A
Step 1: Before You Install the 82357A
Check System Requirements
Before you install the Agilent IO Libraries Suite, you should verify that your
system meets the
minimum hardware and software requirements listed to
install and use the software. Adding additional RAM may improve overall
system performance.
NOTE
The 82357A USB/GPIB Interface Converter is supported ONLY on
Windows 98 Second Edition, Windows Me, Windows 2000, and Windows
XP Professional.
Item Minimum Requirements
Hardware Requirements
PC Operation/
Memory 200 MHz Pentium II (800 MHz recommended)
and 64 MBytes RAM (96 MB recommended).
Hard Drive Space 215 MB for installation: 160 MB for Microsoft
.NET Framework, 55 MB for Agilent IO Libraries
Suite
125 MB for operation: 70 MB for Microsoft .NET
Framework, 55 MB for Agilent IO Libraries Suite
USB Port At least one USB port (to connect 82357A)
Software Requirements
Operating System Windows 98 SE, Windows Me, Windows 2000
(Service Pack 4 or later), or Windows XP
Professional (Service Pack 1 or later).
Agilent IO Libraries Agilent IO Libraries Version L.01.00 or greater, or
Agilent IO Libraries Suite Version 14.0 or greater.
NOTE
For Windows 98 Second Edition, you may need to install usbscan.sys,
located on the Windows 98 CD-ROM. See “Check for usbscan.sys
(Windows 98 SE Only)” in Chapter 3 - Troubleshooting the 82357A for
details.