IEI Integration POC-17i_19i-Series_IEI - Manual (Page 114)

POC-17i/19i Series
Page 102
ƒ The signal input parts or signal output parts (SIP/SOP) need to be connected
properly and any unused SIP/SOP shall not be accessible to unqualified
personnel after the LCD is integrated into a medical system.
ƒ The unit is for exclusive interconnection with IEC 60XXX certified equipment
outside of patient environment and IEC 60601-1 certified equipment inside the
patient environment.
ƒ This device complies with EN60601-1-2. To minimize the interference from
other equipment, a minimum 0.5 m distance shall be kept from other potential
electromagnetic sources, such as cell phones, etc.
ƒ Equipment connected to the analog or digital interfaces must comply with the
respective IEC standards (e.g. IEC 60950 for data processing equipment and
IEC 60601-1 for medical equipment).
ƒ Caution – Use suitable mounting apparatus to avoid risk of injury.
ƒ Warning – Do not modify this equipment without authorization of the
manufacturer.
ƒ Warning – To avoid risk of electric shock, this equipment must only be
connected to a supply mains with protective earth. Instructions provided
indicating not to position ME EQUIPMENT to make it difficult to operate the
disconnection device when an appliance coupler or separable plug is used as
isolation means to meet Chapter 3.1).
ƒ Caution – This adapter FSP Group Inc. PMP120-12-S is a forming part of the
medical device.
ƒ Make sure the user not to contact SIP/SOPs and the patient at the same time.
ƒ DO NOT:
o Drop the system against a hard surface.
o Strike or exert excessive force onto the LCD panel.
o Touch any of the LCD panels with a sharp object
o In a site where the ambient temperature exceeds the rated temperature
A.1.2 Explanation of Graphical Symbols
This symbol warns the user that uninsulated voltage within the unit may have
sufficient magnitude to cause electric shock. Therefore, it is dangerous to
make any kind of contact with any part inside this unit.