IEI Integration POC-17i_19i-Series_IEI - Manual (Page 28)

POC-17i/19i Series
Page 16
3.1 Anti-static Precautions
WARNING:
Failure to take ESD precautions during the maintenance of the device
may result in permanent damage to the device and severe injury to the
user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the POC-17i/19i Series. Dry climates are especially susceptible to ESD. It is
therefore critical that whenever the POC-17i/19i Series is accessed internally, or any other
electrical component is handled, the following anti-static precautions are strictly adhered
to.
ƒ Wear an anti-static wristband: - Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.
ƒ Self-grounding: - Before handling the board touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
ƒ Use an anti-static pad: - When configuring the POC-17i/19i Series, place it
on an antic-static pad. This reduces the possibility of ESD damaging the
device.
ƒ Only handle the edges of the PCB: - When handling the PCB, hold the PCB
by the edges.
3.2 Installation Precautions
When installing the flat panel PC, please follow the precautions listed below:
ƒ Power turned off: When installing the flat panel PC, make sure the power is
off. Failing to turn off the power may cause severe injury to the body and/or
damage to the system.
ƒ Certified Engineers: Modification to the product is not permitted unless with
authorization of the company, certified engineer does not mean he/she has
the authority from the company, so remove the modification part.