IEI Integration POC-17i_19i-Series_IEI - Manual (Page 30)

POC-17i/19i Series
Page 18
Figure 3-1: Back Cover Retention Screws
Step 2: Lift the cover off the POC-17i/19i Series panel PC.
3.5 Removing the Internal Aluminum Cover
WARNING:
Over-tightening rear cover screws will crack the plastic frame.
Maximum torque for cover screws is 5 kg-cm (0.36 lb-ft/0.49 Nm).
To remove the internal aluminum cover, follow the steps below.
Step 1: Remove retention screws securing the internal aluminum cover.
Step 2: Figure 3-2 shows the aluminum cover retention screws of the POC-17i/19i
Series.