4 vga monitor connection, Figure 3-19: usb device connection – IEI Integration POC-17i_19i-Series_IEI User Manual
Page 51
POC-17i/19i Series
Page 39
Figure 3-19: USB Device Connection
Step 3:
Insert the device connector.
Once aligned, gently insert the USB device
connector into the onboard connector.
3.8.4 VGA Monitor Connection
The POC-17i/19i Series has a single female DB-15 connector on the external peripheral
interface panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect
a monitor to the POC-17i/19i Series, please follow the instructions below.
Step 1:
Locate the female DB-15 connector. The location of the female DB-15 connector
Step 2:
Align the VGA connector
. Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.
Step 3:
Insert the VGA connector
.
Once the connectors are properly aligned with the
insert the male connector from the VGA screen into the female connector on the
POC-17i/19i Series. See Figure 3-20.