2 serial device connection, Figure 3-17: lan connection – IEI Integration POC-17i_19i-Series_IEI User Manual
Page 49
POC-17i/19i Series
Page 37
Step 1:
Locate the RJ-45 connectors
on the bottom panel of the POC-17i/19i Series.
Step 2:
Align the connectors.
Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the bottom panel of the POC-17i/19i Series. See
Figure 3-17: LAN Connection
Step 3:
Insert the LAN cable RJ-45 connector.
Once aligned, gently insert the LAN
cable RJ-45 connector into the onboard RJ-45 connector.
3.8.2 Serial Device Connection
The POC-17i/19i Series has two male DB-9 connectors on the bottom panel for serial
devices to be connected. Follow the steps below to connect a serial device to the
POC-17i/19i Series panel PC.
Step 1:
Locate the DB-9 connector
. The location of the DB-9 connector is shown in
Chapter 2
.
Step 2:
Insert the serial connector
. Insert the DB-9 connector of a serial device into
the DB-9 connector on the bottom panel. See Figure 3-18.