IEI Integration RPC-6022G - Manual (Page 34)

RPC-6022GW Rackmount LCD Workstation
Page 34
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
Step 6:
Step 7:
Use box cutters, a knife or a sharp pair of scissors to open the top of the external
(second) box.
Open the external (second) box.
Use box cutters, a knife or a sharp pair of scissors to open the top of the internal
(first) box.
Lift the workstation out of the boxes.
Remove both polystyrene ends from each side.
Pull the plastic cover off the workstation.
Make sure all the components listed in the packing list are present.
Step 0:
4.2.3 Packing List
NOTE:
If some of the components listed in the checklist below are missing, please do
not proceed with the installation. Contact the IEI reseller or vendor you
purchased the RPC-6022GW from or contact an IEI sales representative
directly. To contact an IEI sales representative, please send an email to
[email protected] .
When the RPC-6022GW Rackmount LCD Workstation is received, make sure all the
components listed below are present.