IEI Integration RPC-6022G - Manual (Page 43)

RPC-6022GW Rackmount LCD Workstation
Page 43
Step 3:
Step 4:
Step 1:
Carefully lift the loose end of the CPU card clamp, and then unhook the other
end (Figure 4-5).
Figure 4-5: Unhook the CPU Card Clamp
Remove the CPU card clamp from the chassis. Step 0:
4.5.3 Remove the Drive Bracket
The drive bracket is secured to the RPC-6022GW Rackmount LCD Workstation with two
retention screws inside the chassis and four outside the chassis. To remove the drive
bracket, please follow the steps below.
Remove four retention screws that secure the drive bracket to the chassis
(Figure 4-6)