Installation steps, Installing components into the rpc-6022gw, 3 installation steps – IEI Integration RPC-6022G User Manual
Page 39: Nstalling, Omponents into the, Rpc-6022gw
RPC-6022GW Rackmount LCD Workstation
Page 39
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
Step 6:
Step 7:
Step 8:
Step 9:
Step 10:
Step 11:
Step 12:
4.4.3 Installation Steps
Complete the following steps to properly install the workstation:
Open the top cover.
Remove the CPU card clamp.
Remove the disk drive brackets.
Install the disk drives.
Reinstall the disk drive bracket with the installed disk drives.
Install the backplane.
Install the CPU card.
Install the PCI or ISA expansion cards (optional).
Connect all required cables.
Reinstall the CPU card clamp.
Close the top cover.
Mount the workstation.
Step 0:
4.5 Installing Components into the RPC-6022GW
NOTE:
This section gives a generic description of the component installation
process for the RPC-6022GW Rackmount LCD Workstation.