Remove the drive slot blank plate, 4 remove the drive slot blank plate, Figure 4-6: drive bracket retention screws – IEI Integration RPC-6022G User Manual
Page 44
Advertising
RPC-6022GW Rackmount LCD Workstation
Page 44
Step 2:
Step 1:
Internal Screws
External Screws
Figure 4-6: Drive Bracket Retention Screws
Remove the drive bracket from the chassis.
Step 0:
4.5.4 Remove the Drive Slot Blank Plate
The drive bracket has one 5.25” and one 3.5” drive slot blank plates. To remove the drive
slot blank plates, please follow the steps below.
Remove the retention screws that secure the drive slot blank plate to the drive
Figure 4-7: Drive Slot Blank Plate Retention Screws
Advertising