Proface GP4100 - 3.4 Compact HMIs" - Manual (Page 19)

GP-4100 Series Hardware Manual
1-2
1.1 Accessories
All accessories listed here are produced by Pro-face.
1.1.1 Serial Interface Item
1.1.2 USB (Type A) Interface
1.1.3 USB (mini-B) Interface
1.1.4 Option Items
Product Name Model No. Description
Mitsubishi PLC A-Series
Cable (5 m)
ZC9CBA51
Connects the GP directly to the CPU
programming port on the Mitsubishi Electric
PLC A/QnA series. (3.4 inch)
Mitsubishi PLC Q-Series
CPU I/F Cable (3 m)
ZC9CBQ31
Connects the GP directly to the CPU
programming port on the Mitsubishi Electric
PLC Q series. (3.4 inch)
Mitsubishi PLC FX-Series
CPU I/F Cable (1 m)
ZC9CBFX11
Connect the GP directly to the CPU
programming port on the Mitsubishi Electric
PLC FX series. (3.4 inch)
Mitsubishi PLC FX-Series
CPU I/F Cable (5 m)
ZC9CBFX51
Panasonic Electric Works
PLC FP Series CPU Cable
(2 m)
ZC9CBFP21
Connects the GP directly to the CPU port on
the Panasonic Electric Works PLC FP series.
(3.4 inch)
MPICable
CA3-MPI-PGN-PFE
(3.5m)
CA3-MPI-PG1-PFE
(3.5m)
Connects a host controller to the GP-4107 for
MPI communication.
Product Name Model No. Description
USB Panel-mount Extension
Cable (USB Type A) (1 m)
CA5-USBEXT-01
Extension cable attaching to the USB (Type
A) port on the front side of the operation
panel.
USB-Serial (RS-232C)
Conversion Cable (0.5 m)
CA6-USB232-01
Cable for converting a GP unit’s USB
interface (Type A) into a serial interface (RS-
232C). Only available for communication
using the Screen Creation Software’s
Expanded SIO Feature.
Product Name Model No. Description
USB Transfer Cable
(USB A/mini-B) (1.8 m)
ZC9USCBMB1
Cable for transferring screen data from a PC
(USB A) to the GP (USB mini-B).
USB Panel-mount Extension
Cable (USB mini-B) (1 m)
ZC9USEXMB1
Extension cable attaching to the USB (mini-B)
port on the front side of the operation panel.
Product Name Model No. Description
3.4-inch Screen Protection
Sheet
ZC9DS31
Disposable, dirt-resistant sheet for the GP
unit’s screen. (5 sheets/set) (Hard type)