Proface GP4100 - 3.4 Compact HMIs" - Manual (Page 23)

GP-4100 Series Hardware Manual
1-6
„USB (Type A)/ USB (mini-B) Interface
• If connecting a bar code reader to the GP, be sure to supply power from an external
source (such as a self-powered hub). If you supply power from the GP, the GP may
reset itself because the GP cannot supply enough power.
GP-4100 Series
USB (Type A) Interface
(USB1)
USB (mini-B) Interface
(USB2)
Bar-Code Reader*1
(Commercial type)
USB Hub
(Commercial type)
USB Hub
(Commercial type)
USB Memory Strage*1
(Commercial type)
USB Panel-mount
Extension Cable
(USB Type A)
CA5-USBEXT-01
USB Panel-mount
Extension Cable
(USB mini-B)
ZC9USEXMB1
*1
For supported models, refer to Pro-face’s support site “Otasuke Pro!”
(http://www.pro-face.com/otasuke/).
You can connect to this site by clicking the GP-Pro EX’s [Help (H)] menu-
[Connect to Support Site “Otasuke Pro!” (C)] command.
USB-Serial (RS-232C)
Conversion Cable
CA6-USB232-01 RS-232C Cable
(Prepared by user)
Microcomputer Board, etc...
Communication using
the Screen Creation Software’s
Extended SIO Feature