Proface GP4100 - 3.4 Compact HMIs" - Manual (Page 60)

Chapter 4 Installation and Wiring
4-15
4.3 USB Cable Clamp Attachment/Removal
This clamp is used to prevent the USB cable connected to the USB Interface of the GP unit from being
unplugged due to vibration or other causes.
4.3.1 USB (Type A) Interface
„Attachment
(1) Before starting the procedure, lift down the tab of the USB Holder and remove the USB Cover.
(2) Attach the USB Holder to the USB (Type A)
Interface part of the main unit. Hook the right pick
of the USB holder to the attachment hole of the
main unit and then insert the left pick as shown to
fix the USB holder.
(3) Insert the USB cable into the USB (Type A)
Interface.
(4) Attach the USB cover to fix the USB cable. Insert
the USB cover into the tab of the USB Holder.
USB holder
2) Insert the left
pick to the
attachment hole.
1) Hook the
right pick to
the attachment
hole.
USB (Type A) cable
USB cover