Proface LT3300 - 5.7 All-in-One HMI" - Manual (Page 20)

Chapter 1 Overview
1-5
*1 For supported models, refer to Pro-face’s support site “Otasuke Pro!”
(http://www.pro-face.com/otasuke/).
You can connect to this site by clicking the GP-Pro EX’s [Help (H)] menu – [Connect to Support Site-
“Otasuke Pro!” (O)] command.
*2 The RS-232C Isolation Unit does not correspond to RS-422/485 (2 wire) communication.
*3 The RS-232C Isolation Unit does not correspond to Serial Multilink communication.
‹ Edit Mode Peripherals
*1 For supported models, refer to Pro-face’s support site “Otasuke Pro!”
(http://www.pro-face.com/otasuke/).
You can connect to this site by clicking the GP-Pro EX’s [Help (H)] menu – [Connect to Support Site-
“Otasuke Pro!” (O)] command.
*2 For details regarding connection methods, be sure to read “Transferring Projects and Data” under
“„COM Transfer Connections” in the GP-Pro EX Reference Manual.
*3 Certain types and models of PCs cannot be used
LT Interfaces
(1) Ethernet Interface
(10BASE-T/100BASE-TX)
Not available with LT-3301L units
(2) USB Host Interface
(3) EX Module Interface
(4) DIO Interface
(5) Serial Interface (COM1)
(RS-232C mode)
(6) Serial Interface (COM1)
(RS-422 mode)
Temperature Controller (etc.) Interfaces
(7) RS-232C Port
(8) RS-422 Port
LT Interfaces
(1) Ethernet Interface
(10BASE-T/100BASE-TX)
Not available with LT-3301L units
(2) USB Host Interface
SEE GP-Pro EX Reference Manual
LT Unit
(2)
USB Transfer Cable
CA3-USBCB-01
USB Port
Screen Editor
Software
GP-Pro EX
Personal Computer *3
(Commercial type)
USB Memory Strage *1
(Commercial type)
USB-Serial (RS-232C)
Conversion Cable
CA6-USB232-01
RS-232C Cable *2
(Prepared by user)
Modem *1
(Commercial type)
Serial Port
Telephone lines
To an Ethernet Network
(1)