Proface LT3300 - 5.7 All-in-One HMI" - Manual (Page 75)

LT3000 Series Hardware Manual
4-8
„ When the DC Type
Power Cord Specifications
Power Connector (Plug) Specifications
Wiring
When connecting the Power Cord, use the following items when performing wiring. (Items are made by
Phoenix Contact.)
Power Cord Diameter 0.75 to 2.5mm
2
(18-12AWG)
Conductor Type Simple or Twisted Wire
Conductor Length
• Use copper conductors only.
• If the Conductor’s end (individual) wires are not twisted correctly, the end wires
may either short against each other, or against an electrode.
+
24V
-
0V
FG
FG Grounding Terminal connected to the
LT
• The power supply connector (plug) is CA5-DCCNM-01 (made by Pro-face) or
MSTB2,5/3-ST-5,08 (made by Phoenix Contact
*1
).
*1 For details, please contact your local Phoenix Contact distributor.
Recommended Driver SZF 1-0.6x3.5 (1204517)
Recommended Pin
Terminals
AI 0.75-8GY (3200519)
AI 1-8RD (3200030)
AI 1.5-8BK (3200043)
AI 2.5-8BU (3200522)
Recommended Pin
Terminal Crimp Tool
CRIMPFOX ZA3 (1201882)
7mm[0.28in.]
Insertion
Direction
+
-
FG