Proface LT3300 - 5.7 All-in-One HMI" - Manual (Page 36)

Chapter 2 Specifications
2-9
• LT3201-A1-D24-K Output Circuit (Sink type)
• LT3201-A1-D24-C Output Circuit (Source type)
• Since the output terminals are not electrically protected, an output line might be short-cir-
cuited or a connection fault might damage the LT unit. Please install an applicable fuse to
prevent an overload in the circuit, if necessary.
• Since the output terminals are not electrically protected, an output line might be short-cir-
cuited or a connection fault might damage the LT unit. Please install an applicable fuse to
prevent an overload in the circuit, if necessary.
L
L
Internal Circuit
Internal Circuit
Fuse
2.5A
DC 24V
External Power
+24V B8
0V A8
OUT5 A11
OUT4 B11
OUT3 A10
OUT2 B10
OUT1 A9
OUT0 B9
+ -
Dummy
Resistor
*1
*1 (Example) The output delay time (OFF to ON) is 1.5 µs
where the output current is DC 24V, 50mA. Install an
external dummy resistor to increase the amount of current
when more responsiveness is required and the load is light.
L
L
Internal Circuit
Internal Circuit
Fuse
2.5A
DC 24V
External Power
+24V B8
0V A8
OUT5 A11
OUT4 B11
OUT3 A10
OUT2 B10
OUT1 A9
OUT0 B9
+
-
Dummy Resistor
*1
*1 (Example) The output delay time (ON to OFF) is 1.5 µs where the output current is DC 24V, 50mA.
Install an external dummy resistor to increase the amount of current when more responsiveness is
required and the load is light.