Proface APL3000B - Node Box PC - Manual (Page 10)

9
Installation prerequisites for standards
• UL listed products
• c-UL listed products
• Product List
UL/c-UL File No.: E220851
For the detailed certification's information, refer to the Pro-face Home page.
<Cautions>
Be aware of the following items when building the PS-A into an end-use product:
• The PS-A unit’s rear face is not approved as an enclosure. When building the PS-A unit into an end-use product, be
sure to use an enclosure that satisfies standards as the end-use product’s overall enclosure.
• The PS-A unit must be used indoors only.
• Install and operate the PS-A with its front panel facing outwards.
• If the PS-A is mounted so as to cool itself naturally, be sure to install it in a vertical panel. Also, it’s recommended that
the PS-A should be mounted at least 50 mm [1.97 in.] away from any other adjacent structures or machine parts. The
temperature must be checked on the final product in which the PS-A is installed.
• For use on a flat surface of a Type 4X (Indoor Use Only) and/or Type 12 Enclosure.
• Type 4X (Indoor Use Only) and/or 12 Enclosure, when the hatch for Front USB Port is secured by screw.
Type 1 Enclosure, when the hatch for Front USB Port is open.
• The temperature rating of field installed conductors: 75
o
C only.
The safety certificate can be downloaded from Pro-face Home Page.
Home Page URL
http://www.pro-face.com/
Industrial Control Equipment refer to UL508
see [a] in the
“Product List“
Process Control Equipment
refer to CSA-C22.2
No.142 see [b] in the
“Product List“
Product Model No.
Registration Model
No.
UL c-UL
[a] [b]
PS3650A-T42
3480801-02
9 9
PS3650A-T42S 9 9
PS3651A-T42
3480801-01
9 9
PS3651A-T42S 9 9
PS3650A-T42-24V
3480801-12
9 9
PS3650A-T42S-24V 9 9
PS3651A-T42-24V
3480801-11
9 9
PS3651A-T42S-24V 9 9