Watlow Series 96 - Manual (Page 46)

*These parameters are added if the ramping software option has been ordered (96 _ _ - _ _ _ _ - AA _ _ ) .
**These parameters are removed if the ramping software option has been ordered (96 _ _ - _ _ _ _ - AA _ _ ) .
NOTE: For more information about how parameter settings affect the controller’s operation, see Chapter Five, Features.
Active if Failure Mode (Global
Menu) is set to [MAn] (manu-
al) and Setup Page Lock (Lock-
out Menu) is not set to
[hide].
903 r/w 0.0 (0) heat: 0.0 to 100.0
(0 to 1000)
cool: -100.0 to 0.0
(-1000 to 0)
heat/cool: -100.0 to
100.0 (-1000 to 1000)
[MAn] Manual Default
Power**
Select output power
for manual mode.
Active if Setup Page Lock (Lock-
out Menu) is not set to [hide].
902 r/w [bPLS] (0) [bPLS] bumpless (0)
[Man] manual (1)
[`OFF] off (2) [FAIL] Failure Mode**
Select failure mode
after errors.
Active if Setup Page Lock (Lock-
out Menu) is not set to [hide].
607 r/w [nLat] (1) [`Lat] latching (0)
[nLat] no latching (1) [`Err] Input Error Latch-
ing
Select input error
latching mode.
Active if Sensor Type 1 (Input 1
Menu) is set to RTD or thermo-
couple and Setup Page Lock
(Lockout Menu) is not set to
[hide].
901 r/w [``°F] (0) [``°F] °Fahrenheit (0)
[``°C] °Celsius (1) [`C-F] °C or °F
Select the tempera-
ture scale for the
input. Converts all
temperature param-
eters.
Active if Setup Page Lock (Lock-
out Menu) is not set to [hide].
900 r/w [``Us] (1) [``Us] propbands in
degrees, reset and
rate (1)
[``sI] propbands in
degrees, integral and
derivative (2)
[Unit] Units Type
Select US or SI units
of measurement.
[glbl] Global Menu
[`set] Setup Page
**** Output 4 parameters
cannot be changed with the
Modbus interface.
Active if output 4 is equipped for
communications (96 _ _-_ _ _ R-
_ _ _ _ or 96 _ _-_ _ _ U-_ _ _ _)
and Setup Page Lock (Lockout
Menu) is not set to
[hide].
none**** 1 1 to 247 [Addr] Address
Set communications
address.
Active if output 4 is equipped for
communications (96 _ _-_ _ _ R-
_ _ _ _ or 96 _ _-_ _ _ U-_ _ _ _)
and Setup Page Lock (Lockout
Menu) is not set to
[hide].
none**** [9600] [1200] 1200
[2400] 2400
[4800] 4800
[9600] 9600
[1(20] 19.2K [bAUd] Baud Rate
Set communications
baud rate.
Active if output 4 is equipped for
retransmit (96 _ _-_ _ _ M-_ _ _
_),
[Aout] (Analog Output 4) is
not set to [`OFF] and Setup
Page Lock (Lockout Menu) is
not set to
[hide].
none**** 0 -1999 to 9999 [ACAL] Analog Output
Offset
Set analog output
offset.
6 . 1 6 ■ P a r a m e t e r s Wa t l o w S e r i e s 9 6
Setup Page / Global Menu
Display Parameter Range Default Modbus Conditions for
(Modbus Value) Register Parameters to Appear
read/write