APC Battery Management System - Manual (Page 148)

®
USER’S GUIDE
Battery Management System
141
Load the server certificate to the Management Card.
Perform these
steps:
1. On the Network menu of the Web interface of the Battery
Management System, select the Web/SSL option.
2. In the SSL Server Certificate section of the page, browse to the
server certificate, the .p15 file you created in the procedure Import the
signed certificate . (The default location is C:\Program Files\American
Power Conversion\APC Security Wizard .)
Alternatively, you can use FTP or Secure CoPy (SCP) to
transfer the server certificate to the Management Card. If you
use FTP or SCP for the transfer, you must specify the correct
location,
\sec , on the Management Card. For SCP, the
command to transfer a certificate named cert.p15 to a
Management Card with an IP address of 156.205.6.185
would be:
scp cert.p15 [email protected]:\sec\cert.p15