APC Battery Management System - Manual (Page 91)

®
USER’S GUIDE
Battery Management System
84
Email Recipients
To identify up to four e-mail recipients to be notified of events, use one of
the following:
• The Recipients option of the Web interface’s Events menu
• The Email option of the control console’s Network Menu
Setting Description
To Address Defines the user and domain names of the recipient.
To use e-mail for paging, use the e-mail address for the recipient’s
pager gateway account (for example, [email protected]). The
pager gateway pages the recipient.
Note: The recipient’s pager must be able to use text-based messaging.
Send via Selects one of the following methods for routing e-mail:
• Through the Battery Management System’s SMTP server (the
recommended option, Local SMTP Server ). E-mail is sent before the
Battery Management System’s 20-second timeout, and, if necessary,
is retried several times.
• Directly to the recipient’s SMTP server (the Recipient’s SMTP Server
option). On a busy remote SMTP server, the timeout may prevent
some e-mail from being sent, and with this option, the Battery
Management System tries to send the e-mail only once.
When the recipient uses the Battery Management System’s SMTP
server, this setting has no effect.
Email
Generation Enables (by default) or disables sending e-mail to the defined recipient.