Brocade FastIron Ethernet Switch IP Multicast Configuration Guide - Manual (Page 148)

Output of show ip igmp proxy TABLE 18
Field Description
Address Group address.
Mode Multicast group mode. Can be "exclude" or "include."
Source count Number sources in the given mode. A group in IGMP v2 has exclude mode with zero sources.
ref count Number of proxy interfaces where the responses (query, state, change, etc) are scheduled.
flags Can be "0" or "1." "1" indicates that the group state has changed and it needs to be reevaluated
before a response is generated. "0" indicates that no change in state response is scheduled.
Name Interface name.
Oper version Current querier version or configured version.
Cfg Robust Configured robustness value.
Unsoli Interval Unsolitcited report interval in seconds.
Filter Acl Id Number of the access list.
Filter Name Name of the access list.
Use the show ip igmp proxy summary
command to see summary information.
Brocade#sh ip igmp proxy summary
Proxy instances:
-----------------------------------
Inst-Name Total Grps
-----------------------------------
default-vrf 4
The report shows the following information.
Output of show ip igmp proxy summary TABLE 19
Field Description
Inst-Name Number of the proxy instance.
Total Grps NUmber of proxy groups.
Syntax: show ip igmp proxy summary
Use the show ip igmp proxy stats
command to see information about queries and reports on a specific interface.
Brocade#sh ip igmp proxy stats
Intf genQv1 genQv2 genQv3 GrpQ SrcQ Rprtv1 Rprtv2 Rprtv3 leave
RX RX RX RX RX TX TX TX TX
--------------------------------------------------------------------------------
v3000 0 0 0 0 0 0 0 0 0
Syntax: show ip igmp proxy stats
IPv4 Multicast Protocols
146 FastIron Ethernet Switch IP Multicast Configuration Guide
53-1003085-02